Rat Cages

Series 410 Rat Cage

The Series 410 cages are designed for large rodents. They are appropriate for use with rats and guinea pigs, and are available in three interchangeable sizes.

The sides and back of the Series 410 cages are constructed of solid panels, while the floor and front are formed from a single sheet of #2 mesh. (Lighter-duty #3 mesh is available upon request). The Series 410 cages offer an optional solid bottom for nesting and maternity use. This can be supplied as a removable plate, or fixed permanently to the cage. (Please specify when ordering.)

Several types of feeder accessories may be used with the Series 410 cages.

Series 410 “CH” models are identical to those described above, but include a 1 1/2″ cardholder header across the top of the cage front.

Transfer pan/cover units and metabolism units are also available, but for Single-size “A” cages only.

Specifications

Part No. Size Dimensions Animal Space
410-A410-ACH Single 7 7/8″ W x 10 5/8″ D x 7 1/8″ H Area: 70 sq in (432.2 sq cm)
Height: 7 in (17.8 cm)
410-B410-BCH Double 17 1/8″ W x 10 5/8″ D x 7 1/8″ H Area: 154 sq in (993.3 sq cm)
Height: 7 in (17.8 cm)
410-C410-CCH Triple 26 3/8″ W x 10 5/8″ D x 7 1/8″ H Area: 241 sq in (1,554.5 sq cm)
Height: 7 in (17.8 cm)

Series 470 Rat Cage

Series 470 cages are the deluxe model of the large rodent cages. These are ideally suited for rats and guinea pigs, and are available in two sizes.

The sides and back of the cages are fabricated from solid panels, while the floor and front are formed of a single panel of #2 wire mesh. A special fabrication design eliminates folded edges, which allows excreta to drop through the bottom without restriction; radiused rear vertical corners make the cage easier to clean. The Series 470 cages are fabricated with a full width header, which strengthens the cage and serves as a pull handle.

The series 470 cages are also available with a solid bottom. Several styles of feeder accessories may be used with this cage.

Transfer pan/cover units and metabolism units are also available, but for Single-size “A” cages only.

Specifications

Part No. Size Dimensions Animal Space
470-A Single 9″ W x 13 5/8″ D x 8 1/4″ H Area: 101 sq in (651.5 sq cm)
Height: 8 in (20.3 cm)
470-B Double 19″ W x 13 5/8″ D x 8 1/4″ H Area: 223 sq in (1,438.4 sq cm)
Height: 8 in (20.3 cm)

Stainless Steel Solid Bottom Rat Cage

Unifab Stainless Steel Solid Bottom Cages are an alternative to polycages that will help facilities transition to solid bottom caging. The Unifab Solid Bottom Stainless Steel Caging will fit onto existing wire mesh caging racks. The stainless steel construction will withstand many years of use and cagewashing. Each cage will have a solid bottom with a raised panel in the front to retain bedding. Cages are custom built for each customers specifications.

Polycarbonate Solid Bottom Cage

Cages constructed from cagewash resistant polycarbonate. Material is clear to allow for easy observation. Can be fitted with water system of your choice or without water. If ordered with Rat Feeder Shields, the restraint rings will be attached.

Specifications

  • Dimensions: 10.25″ W x 18.75″ D x 8″ H
  • Number of Products per Case: 10

Wire Lid

Polycarbonate Cage Rack

Our polycarbonate cage rack is designed for use with the Feeder Shield Feeding System. A 30-animal or 60-animal design is available. The racks are constructed with 304 stainless steel and come standard with two uni-directional casters. Uni-directional casters allow for safer hallway transport. The shelves are perforated and fitted to be used with filter paper. Each rack can be fitted with whatever water system your vivarium uses.

Get a Quote on Rat Cages

Related Projects
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.

Start typing and press Enter to search